····· lezzter Preis 7.57€ ···· Miscota Scandinavia - Online Shop for Pet Supplies Copper test Recommended level for oodinium treatment: 0,3 mg/l Cu Precise test to determine the copper content in fresh water and marine aquariums. Scaling of levels: 0,15; 0,3; 0,45; 0,6; 0,8; 1,2; 1,6; 2,0 mg/l. Also for testing tapwater to detect unwanted copper. Helpful in administering medications and preparations containing copper, as the copper content should never exceed 0.3 mg/l, whilst insufficient doses will not result in a cure.` ····· 1034819482
····· lezzter Preis 14.59€ ···· Miscota Scandinavia - Online Shop for Pet Supplies (Recommended level in saltwater: 400-440 mg/l calcium) Recommended level in saltwater: 400-440 mg/l calcium For saltwater. 1 drop measuring solution 3 = 20 mg/l calcium. Colour change from pink to blue. Includes syringe to measure amount of water. The test shows the calcium level in 20-mg increments. ····· 1034813468
····· lezzter Preis 17.39€ ···· Miscota Scandinavia - Online Shop for Pet Supplies JBL EasyTest 6in1 Test strips for quick aquarium water testing. - Test strips for testing 6 important water values in 1 minute: quick test for aquarium, pond, well and tap water - Easy To use: Move the test strip in water for 2-3 seconds. Take test strip out of water. Drain off the water horizontally. After 1 minute: compare test strip with colour scale on the package. - Determination of following values; chlorine, acidity (pH), general hardness (GH), nitrite (NO2), nitrate (NO3) and carbonate hardness (KH) of the water - Quick test to outline the water conditions orientation test in 1 minute Package contents: test strips EasyTest 6 in 1 with colour scale. Contents: 50 test strips. Product information Healthy aquariums with conditions close to nature The right water values depend on the starting water, the fish stock and the existing plants. Even if the water looks clear it can be contaminated. With bad values diseases or algae can appear in the aquarium. To maintain a healthy aquarium with conditions close to nature regular checks and adaptions of the water values are important. The JBL test strips serve here as an orientation test. The following parameters can be determined in a quick test: Disinfectants in the tap water: chlorine test Acidity of the water: pH test from 6.4 up to 9.0 Stability of the water: KH test from 0 up to 20 dKH General hardness of water: GH test from 21 dKH Toxic nitrogen compounds: NO2 from 0 up to 10 mg/l Cause of algae: NO3 from 0 up to 250 mg/l Easy to use Dip the test strip into the aquarium water and move it for 2-3 seconds. Take test strip out of the water and hold it horizontally to allow the water to drain off. Compare the values of the test strip with the colour scale on the package after 60 seconds. Store the test strips in a cool and dry place. Only remove the number of strips which are immediately required. You can analyse your measured water values in the JBL Online Laboratory free of charge and receive recommendations. ····· 1034819249
Affiliate Marketing
AdHoc MeldungenAffiliate & PublisherAdvertiser & MerchantAcademyAntwortenArtikelsucheAdventskalender
AffilitivProduktdatenPreisvergleich
